Product Carousel Tabs
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
BMS 6 Series 22V 18650 Lithium Battery Protection Board
Battery | 6 Cell |
Overcharge detection voltage (V) | 4.25±0.025 |
Over-discharge detection voltage (V) | 2.50±0.08 |
Over current Protection (A) | 50 |
Working current (A) | 14 |
Operating Temperature (°C) | -40 ~ +85 |
Length (mm) | 50 |
Width (mm) | 32 |
Height (mm) | 4 |
Weight (gm) | 6 |
2 Wire 0.56″ Digital DC Voltmeter DC 4.5-30V (Red LED)
Voltage: DC 4.5-30V
Display: Three digit 0.56″ LED, Red color
Max. Input: DC 30V (higher than 30v has the risk of burn up)
Min. Input: DC 4.5V (below than 4.5V,measurement is inaccurate
or does not show)
Minimum Resolution: 0.01V(<10V)/0.1V(>10V)
Resolution: 1%
Size: Approx.: 48mm x 29mm x 22mm(L*W*H)
Current Consumption: <23mA
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Products Carousel
Trending Products
Bestsellers
Best Electronics Final Year Project Ideas
Your Recently Viewed Products
3.3V Adapter Board for nRF24L01 Wireless Module
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
12V DC 1/2 inch Electric Solenoid Water Air Valve Switch (Normally Closed)
Model | 12V DC 1/2″ Solenoid Valve |
Rated Operating Voltage (VDC) | 12 |
Rated Current (mA) | 600 |
Operation Mode | Normally Closed |
Power Consumption (Watt) | 8 |
Pressure | 0.02- 0.8Mpa |
Energized forms | Intermittent |
Inlet and outlet Diameter | Hose barbs for 1/2″ (outer diameter) hose |
Dimensions (mm) LxWxH | Body: 84 x 57mm (L x H) Coil size: 34 x 23mm (W x H) |
Weight (gm) | 100 |
Max fluid temperature | 100C |
STM32F030F4P6 TSSOP-20 ARM Microcontroller-MCU
CRC calculation unit
4 to the 32MHz Crystal oscillator
32kHz Oscillator for RTC with calibration
Internal 8MHz RC with x6 PLL option
Internal 40kHz RC oscillator
0 to 3.6V Conversion range
2.4 to 3.6V Separate analogue supply
Independent and system watchdog timers
SysTick timer