No products in the cart.
Wireless Modules
Showing 1–15 of 44 results
-
RF/IR, Wireless Modules
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver
Voltage: 3-3.6V (recommended 3.3V) V
Maximum output power: +20dBm
Power-down mode current: 4.2uA
Operating Range: 1Km
Antenna Gain (peak): 2Dbi
2MB rate (Open area): 520m
1MB rate (Open area): 750m
250Kb rate (Open area): 1100m
It uses 2.4GHz global open ISM band, with license free
SPI interface facilitates the communication with MCU I/O port.SKU: BM0221 -
Wireless Accessories, Wireless Modules
3.3V Adapter Board for nRF24L01 Wireless Module
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicatorSKU: BM0952 -
RF/IR, Wireless Modules
4 Channel Wireless Transmitter Receiver Remote
No. of the channel: 4
Operating mode: Non-Locking
Receiver Operating voltage: DC 5V.
Receiver sensitivity is: -98dB.
Transmitter Operating voltage: DC 12V
Transmitting frequency: 315 MHZ.
Transmitter Operating current: 10mA at 12V.
Transmitter Radiated power: 10mW at 12V.
Transmission distance (m): 3 to 5.SKU: BM0664 -
Inhouse Products, Wireless Accessories, Wireless Modules
BMES ESP8266 WiFi Breakout Board
Input : 5V/GND DC
Communication Interface : UART/Serial
On Board 3.3V Regulator
On Board Reset & Boot Switch
Compatible with ESP-12E/12F ESP8266 WiFi Module
On-Board Level Shifter
LED on GPIO5
Blog
Usage VideoSKU: BM0100 -
RF/IR, Wireless Accessories, Wireless Modules
DC 12V 10A 1 Channel Wireless Relay Remote Control Switch
-25%
RF/IR, Wireless Accessories, Wireless ModulesDC 12V 10A 1 Channel Wireless Relay Remote Control Switch
Wireless Remote Control Relay
Material: ABS Plastic
Remote Battery: 23A Battery (not included)
Operating voltage: 12V
Frequency: 433MHZ
Transmitting power: 10-15mw
Size (approx.): 58x38x15 (mm) (LxWxH)SKU: BM0457 -
WiFi/Ethernet, Wireless Modules
ESP-WROOM-32 WiFi & BLE Module
CPU and Memory: Xtensa® 32-bit LX6 Dual-core processor, up to 600 DMIPS.
448 KByte ROM
520 KByte SRAM
16 KByte SRAM in RTC.
QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
Supply Voltage: 3V~3.6V
On-board PCB antenna.
SKU: BM0915 -
WiFi/Ethernet, Wireless Modules
ESP01 ESP8266 WiFi Module
802.11 b/g/n Standards
Wi-Fi Direct (P2P), soft-AP
1MB Flash Memory
Integrated low power 32-bit CPU could be used as an application processor
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
Graphical Datasheet
AT Command Set
WikiSKU: BM0101 -
WiFi/Ethernet, Wireless Modules
ESP12F ESP8266 WiFi Module
Communication interface voltage: 3.3V
Working current: 240 mA (MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
+19.5dBm output power
Tutorial
Buy Adapter PlateNOTE: Vendor of these module may be different as per lot. It is not AI Thinker.
SKU: BM0098 -
WiFi/Ethernet, Wireless Modules
ESP32 CAM WiFi Module with OV2640 Camera Module 2MP
Product Includes : Camera + Processing Board
Flash LED off: 180mA @ 5V.
Flash LED on to maximum brightness: 310mA @ 5V.
Deep-sleep: 6mA @ 5V min.
Modem-sleep: 20mA @ 5V min.
Light-sleep: 6.7mA @ 5V min.
Tutorial
SKU: BM0501 -
WiFi/Ethernet, Wireless Modules
ESP32 WiFi Module BLE Bluetooth 4.0 IoT Development Board
Hybrid module with Wi-FI & Bluetooth
High level of integration
Ultra-low power management
Flash Memory: 4 MB
Current – Receiving: 80 mA
Supply Voltage: 2.2 V ~ 3.6 V
Data Rate: 54 Mbps
Frequency: 2.4 GHzSKU: BM0097 -
Wireless Accessories
ESP8266 ESP-01 5V WiFi Relay Switch Module
Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
Transmission Distance : 400m (max)
Relay : 5V,10A/250V AC 10A/30V DC
Baud Rate: 9600.
Contains ESP01 + Relay ModuleSKU: BM0989
