Product Carousel Tabs
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
NodeMCU ESP8266 Baseboard Lua WiFi Development Board
The perfect solution for breaking out the pins from Lua V3 Nodemcu.
Lead-out all the IO ports of the ESP-12E development board
Lead out the pins of 5V and 3.3V power supply
Convenient to connect with peripheral modules
Onboard 5V / 1A DC-DC step-down converter circuit
Onboard power indicator
With DC power jack 6-24V.
Camera Surveillance System – Raspberry Pi Project
Use a PIR sensor and Raspberry Pi Camera to detect any unauthorized movement, capture it and mail it to using Internet of Things (IoT).
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Products Carousel
Trending Products
Bestsellers
Best Electronics Final Year Project Ideas
Your Recently Viewed Products
ESP12F ESP8266 WiFi Module
Communication interface voltage: 3.3V
Working current: 240 mA (MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
+19.5dBm output power
Tutorial
Buy Adapter Plate
NOTE: Vendor of these module may be different as per lot. It is not AI Thinker.
MAX6675 Module with K Type Thermocouple Sensor Measure 1024°C Temperature
Operating Voltage (VDC): 3 to 5.5V
Temperature Range(°C): 0 to +1024
Cold Junction Compensation Range(°C): -20 to +80
Internal integrated cold junction compensation circuit;
With a simple three serial SPI interface;
Temperature signal can be converted into 12-bit digital
Embedded thermocouple break detection circuitry.
High impedance differential inputs.
HC05 Bluetooth Module
Input voltage : 3.3V to 6V (Avoid > 6V DC)
Core module size : 28 mm x 15 mm x 2.35 mm
Default Baud Rate : 9600
Security: Authentication and encryption
Speed : Asynchronous – 2.1 Mbps (Max) / 160 kbps, Synchronous – 1 Mbps
Bluetooth Protocol : Bluetooth Specification v 2.0+EDR
Mode Supported : Master & Slave
Frequency : 2.4 GHz ISM band
Module works well with both 3.3V and 5V Arduino Boards, Default Pin : 1234
ESP8266 ESP-01 5V WiFi Relay Switch Module
Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
Transmission Distance : 400m (max)
Relay : 5V,10A/250V AC 10A/30V DC
Baud Rate: 9600.
Contains ESP01 + Relay Module