Product Carousel Tabs
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Products Carousel
Trending Products
Bestsellers
Best Electronics Final Year Project Ideas
Your Recently Viewed Products
ESP01 ESP8266 WiFi Module
802.11 b/g/n Standards
Wi-Fi Direct (P2P), soft-AP
1MB Flash Memory
Integrated low power 32-bit CPU could be used as an application processor
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
Graphical Datasheet
AT Command Set
Wiki
MAX6675 Module with K Type Thermocouple Sensor Measure 1024°C Temperature
Operating Voltage (VDC): 3 to 5.5V
Temperature Range(°C): 0 to +1024
Cold Junction Compensation Range(°C): -20 to +80
Internal integrated cold junction compensation circuit;
With a simple three serial SPI interface;
Temperature signal can be converted into 12-bit digital
Embedded thermocouple break detection circuitry.
High impedance differential inputs.
NodeMCU ESP8266 Baseboard Lua WiFi Development Board
The perfect solution for breaking out the pins from Lua V3 Nodemcu.
Lead-out all the IO ports of the ESP-12E development board
Lead out the pins of 5V and 3.3V power supply
Convenient to connect with peripheral modules
Onboard 5V / 1A DC-DC step-down converter circuit
Onboard power indicator
With DC power jack 6-24V.
12V DC 1/2 inch Electric Solenoid Water Air Valve Switch (Normally Closed)
Model | 12V DC 1/2″ Solenoid Valve |
Rated Operating Voltage (VDC) | 12 |
Rated Current (mA) | 600 |
Operation Mode | Normally Closed |
Power Consumption (Watt) | 8 |
Pressure | 0.02- 0.8Mpa |
Energized forms | Intermittent |
Inlet and outlet Diameter | Hose barbs for 1/2″ (outer diameter) hose |
Dimensions (mm) LxWxH | Body: 84 x 57mm (L x H) Coil size: 34 x 23mm (W x H) |
Weight (gm) | 100 |
Max fluid temperature | 100C |