Product Carousel Tabs
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
BMS 6 Series 22V 18650 Lithium Battery Protection Board
Battery | 6 Cell |
Overcharge detection voltage (V) | 4.25±0.025 |
Over-discharge detection voltage (V) | 2.50±0.08 |
Over current Protection (A) | 50 |
Working current (A) | 14 |
Operating Temperature (°C) | -40 ~ +85 |
Length (mm) | 50 |
Width (mm) | 32 |
Height (mm) | 4 |
Weight (gm) | 6 |
2 Wire 0.56″ Digital DC Voltmeter DC 4.5-30V (Red LED)
Voltage: DC 4.5-30V
Display: Three digit 0.56″ LED, Red color
Max. Input: DC 30V (higher than 30v has the risk of burn up)
Min. Input: DC 4.5V (below than 4.5V,measurement is inaccurate
or does not show)
Minimum Resolution: 0.01V(<10V)/0.1V(>10V)
Resolution: 1%
Size: Approx.: 48mm x 29mm x 22mm(L*W*H)
Current Consumption: <23mA
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Products Carousel
Trending Products
Bestsellers
Best Electronics Final Year Project Ideas
Your Recently Viewed Products
ESP12F ESP8266 WiFi Module
Communication interface voltage: 3.3V
Working current: 240 mA (MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
+19.5dBm output power
Tutorial
Buy Adapter Plate
NOTE: Vendor of these module may be different as per lot. It is not AI Thinker.
12V DC 1/2 inch Electric Solenoid Water Air Valve Switch (Normally Closed)
Model | 12V DC 1/2″ Solenoid Valve |
Rated Operating Voltage (VDC) | 12 |
Rated Current (mA) | 600 |
Operation Mode | Normally Closed |
Power Consumption (Watt) | 8 |
Pressure | 0.02- 0.8Mpa |
Energized forms | Intermittent |
Inlet and outlet Diameter | Hose barbs for 1/2″ (outer diameter) hose |
Dimensions (mm) LxWxH | Body: 84 x 57mm (L x H) Coil size: 34 x 23mm (W x H) |
Weight (gm) | 100 |
Max fluid temperature | 100C |
3.3V Adapter Board for nRF24L01 Wireless Module
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator