Product Carousel Tabs
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Products Carousel
Trending Products
Bestsellers
Best Electronics Final Year Project Ideas
Your Recently Viewed Products
12V DC 1/2 inch Electric Solenoid Water Air Valve Switch (Normally Closed)
Model | 12V DC 1/2″ Solenoid Valve |
Rated Operating Voltage (VDC) | 12 |
Rated Current (mA) | 600 |
Operation Mode | Normally Closed |
Power Consumption (Watt) | 8 |
Pressure | 0.02- 0.8Mpa |
Energized forms | Intermittent |
Inlet and outlet Diameter | Hose barbs for 1/2″ (outer diameter) hose |
Dimensions (mm) LxWxH | Body: 84 x 57mm (L x H) Coil size: 34 x 23mm (W x H) |
Weight (gm) | 100 |
Max fluid temperature | 100C |
SIM800L GPRS GSM Module
Chip: SIM800L
Voltage: 3.7-4.2V
Support networks: China Mobile, China Unicom and global quad-band network
Module size: 2.5cmx2.3cm
TTL serial port for serial port, you can link directly to the microcontroller. No need MAX232
Power module automatically boot, homing network
3.3V Adapter Board for nRF24L01 Wireless Module
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
ESP12F ESP8266 WiFi Module
Communication interface voltage: 3.3V
Working current: 240 mA (MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
+19.5dBm output power
Tutorial
Buy Adapter Plate
NOTE: Vendor of these module may be different as per lot. It is not AI Thinker.