Product Carousel Tabs
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
BMS 6 Series 22V 18650 Lithium Battery Protection Board
Battery | 6 Cell |
Overcharge detection voltage (V) | 4.25±0.025 |
Over-discharge detection voltage (V) | 2.50±0.08 |
Over current Protection (A) | 50 |
Working current (A) | 14 |
Operating Temperature (°C) | -40 ~ +85 |
Length (mm) | 50 |
Width (mm) | 32 |
Height (mm) | 4 |
Weight (gm) | 6 |
2 Wire 0.56″ Digital DC Voltmeter DC 4.5-30V (Red LED)
Voltage: DC 4.5-30V
Display: Three digit 0.56″ LED, Red color
Max. Input: DC 30V (higher than 30v has the risk of burn up)
Min. Input: DC 4.5V (below than 4.5V,measurement is inaccurate
or does not show)
Minimum Resolution: 0.01V(<10V)/0.1V(>10V)
Resolution: 1%
Size: Approx.: 48mm x 29mm x 22mm(L*W*H)
Current Consumption: <23mA
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Products Carousel
Trending Products
Bestsellers
Best Electronics Final Year Project Ideas
Your Recently Viewed Products
3.3V Adapter Board for nRF24L01 Wireless Module
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
HC05 Bluetooth Module
Input voltage : 3.3V to 6V (Avoid > 6V DC)
Core module size : 28 mm x 15 mm x 2.35 mm
Default Baud Rate : 9600
Security: Authentication and encryption
Speed : Asynchronous – 2.1 Mbps (Max) / 160 kbps, Synchronous – 1 Mbps
Bluetooth Protocol : Bluetooth Specification v 2.0+EDR
Mode Supported : Master & Slave
Frequency : 2.4 GHz ISM band
Module works well with both 3.3V and 5V Arduino Boards, Default Pin : 1234