No products in the cart.
Electronics Parts
Showing 46–60 of 91 results
-
-
Electronics Parts
ESP8266 ESP-01 5V WiFi Relay Switch Module
Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
Transmission Distance : 400m (max)
Relay : 5V,10A/250V AC 10A/30V DC
Baud Rate: 9600.
Contains ESP01 + Relay ModuleSKU: BM0989 -
Electronics Parts
ESP8266 NodeMCU CH340G WiFi Module
USB to UART Chip: CH340G
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Support Smart Link Smart Networking
Working temperature: -40°C ~ + 125°C
Drive Type: Dual high-power H-bridge
Don’t need to download resetting
A great set of tools to develop ESP8266
Flash size: 4MByteSKU: BM0099 -
Electronics Parts
ESP8266 NodeMCU CP2102 WiFi Module
USB to UART Chip: CP2102
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLL, regulators, DCXO and power management units
Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
Embeds logic level converter circuits
Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
Easy access to the GPIO pins for easy prototyping
ESP-12E Processor
SKU: BM0953 -
-
Electronics Parts
GPS Module Ublox NEO6M
Power Supply Range: 3 V to 5 V
5Hz position update rate
EEPROM to save configuration settings
The cold start time of 38 s and Hot start time of 1 s
Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
Separated 18X18mm GPS antenna
SKU: BM0483 -
-
Electronics Parts
HC05 Bluetooth Module
Input voltage : 3.3V to 6V (Avoid > 6V DC)
Core module size : 28 mm x 15 mm x 2.35 mm
Default Baud Rate : 9600
Security: Authentication and encryption
Speed : Asynchronous – 2.1 Mbps (Max) / 160 kbps, Synchronous – 1 Mbps
Bluetooth Protocol : Bluetooth Specification v 2.0+EDR
Mode Supported : Master & Slave
Frequency : 2.4 GHz ISM band
Module works well with both 3.3V and 5V Arduino Boards, Default Pin : 1234SKU: BM0012 -
Electronics Parts
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight BulbSKU: BM0010-5 -
Electronics Parts
HM-10 BLE Bluetooth Module (Clone)
Bluetooth Protocol: Bluetooth Specification V4.0 BLE
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
Transmission Rate: Asynchronous: 6 kbps
Synchronous: 6 kbps
Security Feature: Authentication and encryption
Power Supply: +5VDC 50mA
Physical Dimension: 27mm x 13mm x 2.2 mm (LxWxH)
DatasheetSKU: BM0012-HM
