Product Carousel Tabs
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
Camera Surveillance System – Raspberry Pi Project
Use a PIR sensor and Raspberry Pi Camera to detect any unauthorized movement, capture it and mail it to using Internet of Things (IoT).
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
3.3V Adapter Board for nRF24L01 Wireless Module
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
Products Carousel
Trending Products
Bestsellers
Best Electronics Final Year Project Ideas
Your Recently Viewed Products
GPS Module Ublox NEO6M
Power Supply Range: 3 V to 5 V
5Hz position update rate
EEPROM to save configuration settings
The cold start time of 38 s and Hot start time of 1 s
Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
Separated 18X18mm GPS antenna
HC05 Bluetooth Module
Input voltage : 3.3V to 6V (Avoid > 6V DC)
Core module size : 28 mm x 15 mm x 2.35 mm
Default Baud Rate : 9600
Security: Authentication and encryption
Speed : Asynchronous – 2.1 Mbps (Max) / 160 kbps, Synchronous – 1 Mbps
Bluetooth Protocol : Bluetooth Specification v 2.0+EDR
Mode Supported : Master & Slave
Frequency : 2.4 GHz ISM band
Module works well with both 3.3V and 5V Arduino Boards, Default Pin : 1234