No products in the cart.
Free Delivery from Rs 999
99% Positive Feedbacks
High Quality Products
Payment Secure System
Unique Project Ideas
Product Carousel Tabs
Electronics Parts
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
SKU: BM0010-5
Project Software/Codes
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
SKU: BMP080
Raspberry Pi Projects
Camera Surveillance System – Raspberry Pi Project
Use a PIR sensor and Raspberry Pi Camera to detect any unauthorized movement, capture it and mail it to using Internet of Things (IoT).
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
SKU: BMP204A
Electronics Parts
GPS Module Ublox NEO6M
Power Supply Range: 3 V to 5 V
5Hz position update rate
EEPROM to save configuration settings
The cold start time of 38 s and Hot start time of 1 s
Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
Separated 18X18mm GPS antenna
SKU: BM0483
Electronics Parts
2 Wire 0.56″ Digital DC Voltmeter DC 4.5-30V (Red LED)
Voltage: DC 4.5-30V
Display: Three digit 0.56″ LED, Red color
Max. Input: DC 30V (higher than 30v has the risk of burn up)
Min. Input: DC 4.5V (below than 4.5V,measurement is inaccurate
or does not show)
Minimum Resolution: 0.01V(<10V)/0.1V(>10V)
Resolution: 1%
Size: Approx.: 48mm x 29mm x 22mm(L*W*H)
Current Consumption: <23mA
SKU: BM0723
Electronics Parts
ESP12F ESP8266 WiFi Module
Communication interface voltage: 3.3V
Working current: 240 mA (MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
+19.5dBm output power
Tutorial
Buy Adapter Plate
NOTE: Vendor of these module may be different as per lot. It is not AI Thinker.
SKU: BM0098
Electronics Parts
High Brightness LED (12V/5W)
Type: LED Light (5 Watt) 6500k
Intensity: Typical 800~900 Lumen
Voltage: 9 to 12 Volt
Forward Current: 1000mA max.
Beam Angle(°): 120°
Average Life (hrs): Greater than 50000 hours when used with proper heat sink on these
Color: White
Color Temperature: Cool White(6700-8000K)
Led Bulb Type: Spotlight Bulb
SKU: BM0010-5
Project Software/Codes
Voice Controlled Notice Board (Digital Notice Board)
Update the content of a Notice Board via voice message using an Android app.
Video Demo
NOTE : This is a downloadable product and code/schematic files will be available to use on your account after you purchase this product.
No hardware will be shipped.
SKU: BMP080
Electronics Parts
4 Channel Wireless Transmitter Receiver Remote
No. of the channel: 4
Operating mode: Non-Locking
Receiver Operating voltage: DC 5V.
Receiver sensitivity is: -98dB.
Transmitter Operating voltage: DC 12V
Transmitting frequency: 315 MHZ.
Transmitter Operating current: 10mA at 12V.
Transmitter Radiated power: 10mW at 12V.
Transmission distance (m): 3 to 5.
SKU: BM0664
