No products in the cart.
WiFi/Ethernet
Showing all 10 results
-
WiFi/Ethernet, Wireless Modules
ESP-WROOM-32 WiFi & BLE Module
CPU and Memory: Xtensa® 32-bit LX6 Dual-core processor, up to 600 DMIPS.
448 KByte ROM
520 KByte SRAM
16 KByte SRAM in RTC.
QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
Supply Voltage: 3V~3.6V
On-board PCB antenna.
SKU: BM0915 -
WiFi/Ethernet, Wireless Modules
ESP01 ESP8266 WiFi Module
802.11 b/g/n Standards
Wi-Fi Direct (P2P), soft-AP
1MB Flash Memory
Integrated low power 32-bit CPU could be used as an application processor
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
Graphical Datasheet
AT Command Set
WikiSKU: BM0101 -
WiFi/Ethernet, Wireless Modules
ESP12F ESP8266 WiFi Module
Communication interface voltage: 3.3V
Working current: 240 mA (MAX)
Serial port baud rate: 115200 (default), can be modified to other values by AT command
Serial communication format: 8N1
Wireless Network Mode: station / softAP / SoftAP + station
Wireless criteria: 802.11 b / g / n
WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
+19.5dBm output power
Tutorial
Buy Adapter PlateNOTE: Vendor of these module may be different as per lot. It is not AI Thinker.
SKU: BM0098 -
WiFi/Ethernet, Wireless Modules
ESP32 CAM WiFi Module with OV2640 Camera Module 2MP
Product Includes : Camera + Processing Board
Flash LED off: 180mA @ 5V.
Flash LED on to maximum brightness: 310mA @ 5V.
Deep-sleep: 6mA @ 5V min.
Modem-sleep: 20mA @ 5V min.
Light-sleep: 6.7mA @ 5V min.
Tutorial
SKU: BM0501 -
WiFi/Ethernet, Wireless Modules
ESP32 WiFi Module BLE Bluetooth 4.0 IoT Development Board
Hybrid module with Wi-FI & Bluetooth
High level of integration
Ultra-low power management
Flash Memory: 4 MB
Current – Receiving: 80 mA
Supply Voltage: 2.2 V ~ 3.6 V
Data Rate: 54 Mbps
Frequency: 2.4 GHzSKU: BM0097 -
WiFi/Ethernet, Wireless Modules
ESP8266 NodeMCU CH340G WiFi Module
USB to UART Chip: CH340G
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Support Smart Link Smart Networking
Working temperature: -40°C ~ + 125°C
Drive Type: Dual high-power H-bridge
Don’t need to download resetting
A great set of tools to develop ESP8266
Flash size: 4MByteSKU: BM0099 -
WiFi/Ethernet, Wireless Modules
ESP8266 NodeMCU CP2102 WiFi Module
USB to UART Chip: CP2102
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLL, regulators, DCXO and power management units
Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
Embeds logic level converter circuits
Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
Easy access to the GPIO pins for easy prototyping
ESP-12E Processor
SKU: BM0953
